Unfortunately I have not been able to test it.Test the ignition in all position prior to fitting to ensure the colours correspond.
Some cheaper switches are not always correct on the colours
A word of warning: the Black and Blue/Yellow from the loom wires are vital to get right on the ignition switch.The black and blue yellow should be only be an on off switch and not connected to anything else in the ignition switch when the switch is off, on or park
Wrong and bike wont start and if you connect them to 12v it can take out the Neutral switch and the side stand switch or blow fuses.
Some cheaper switches are not always correct on the colours
A word of warning: the Black and Blue/Yellow from the loom wires are vital to get right on the ignition switch.The black and blue yellow should be only be an on off switch and not connected to anything else in the ignition switch when the switch is off, on or park
Wrong and bike wont start and if you connect them to 12v it can take out the Neutral switch and the side stand switch or blow fuses.