27-09-23, 06:32 PM
You need to check the wiring and see if you are getting 12v on the wire that controls the headlight from the RHS switch then see if you are getting 12v on the common wire to teh LHS switch then on the output from the LHS switch for high and dipped/low beam.
If the flasher switch is illuminating the bulbs then high beam should work if the switches work and you dont have a bad connection on one of the plugs
If the flasher switch is illuminating the bulbs then high beam should work if the switches work and you dont have a bad connection on one of the plugs
Another ex-Fazer rider that is a foccer again