19-08-23, 09:38 PM
So you have checked the sprocket nut with a tourque wrench is that it is right ?But you can not do this without removing the locking tab washer - so is it possible that the shaft is spinning inside the sprocket when under load - nasty noise.
When the sprocket was done with the upgraded nut what tourque was it done to and was there the correct lock tight applied or even the right one.
Other than that you said that the clutch was replaced - others more expert on that subject will help but I think you can have problems with wrong springs or fitting it wrong or somthing.
When the sprocket was done with the upgraded nut what tourque was it done to and was there the correct lock tight applied or even the right one.
Other than that you said that the clutch was replaced - others more expert on that subject will help but I think you can have problems with wrong springs or fitting it wrong or somthing.
I don't do rain or threat there of. dry rider only with no shame.