23-07-23, 07:06 PM
(23-07-23, 09:12 AM)unfazed link Wrote: If the carbs were off it is possible the rubbers front and back were not put on properly you need to check them especially the two with the issue.
If they are all on correctly check that all the vacuum take off caps are on properly between the engine and the carbs
Open the drain screws on 2 and 4 and let the fuel flow out.
Turn the kill switch to off and switch on the ignition. Now watch the fuel flow from the drains when you switch in the kill switch, you will hear the pump clicking. If fuel flows from both then the fuel is getting to the bowls. Turn of the kill switch and close the drain screws. If it only comes from one the close the drain screw on it .Now turn on the kill switch again check the flow from the one that wasn't flowing. If it flows then turn off the kill switch and close the drain screw. Turn on the kill switchTurn the ignition on and off until the pump stops clicking when indicates the bowls are full
Remember the pump times out after a short while and the ignition needs to be switch on and off the reset it.
Start the bike and see it the issue remains
Looks very complicated for me , who hasnt done any mechanical work. Ofc I can go to a mechanics, but that would cost half of the bike already.
Any youtube video done on similar bike that I can follow along? I apologise for the endless requests, i just need to ride soon for my holiday and this issue is driving me crazy now.