01-04-23, 02:04 PM
I tried Toolstation, Screwfix and B&Q, but none had a bit big enough.
However I did find an 8mm cold chisel at B&Q which fitted into a socket on the impact driver and breaker bar and was big enough to get into what was left of the bolt head, but even after giving it 5 minutes with the blow torch, it still wouldn't shift, so I've now cut the disc off.
Unfortunately the head is almost completely destroyed, so it's going to need to be drilled out.
I'm wondering if I can get by with only 4 bolts until then as it's only the rear brake...
However I did find an 8mm cold chisel at B&Q which fitted into a socket on the impact driver and breaker bar and was big enough to get into what was left of the bolt head, but even after giving it 5 minutes with the blow torch, it still wouldn't shift, so I've now cut the disc off.
Unfortunately the head is almost completely destroyed, so it's going to need to be drilled out.
I'm wondering if I can get by with only 4 bolts until then as it's only the rear brake...