07-11-22, 04:25 PM
If it's snagging at a certain point, suggests the valve is very slightly bent.
You can check by laying a straight edge along the back of the valve and measuring/eyeballing if the spindles are parallel.
Or spin the valve on V-blocks to see if the rotation is eccentric.
Heat the body of the valve and gently bend to straighten it out.
You can check by laying a straight edge along the back of the valve and measuring/eyeballing if the spindles are parallel.
Or spin the valve on V-blocks to see if the rotation is eccentric.
Heat the body of the valve and gently bend to straighten it out.