|
In deep now
|
04-11-22, 08:41 PM
Patiently removed all of the stuff to get access to the valves, what a faff. And having done all that, the chuffin valves don't need any shims as all within spec. Inlets tolerance is 0.13 to 0.20, mine are between 0.15 and 0.17. Exhaust tolerance is 0.23 to 0.20, mine come in at 0.25 to 0.28. Just the new gaskets to order now, and then try to squeeze it all back together
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
In deep now - by agricola - 04-11-22, 08:41 PM
Re: In deep now - by unfazed - 05-11-22, 12:32 AM
Re: In deep now - by Grahamm - 05-11-22, 12:08 PM
Re: In deep now - by agricola - 05-11-22, 03:46 PM
Re: In deep now - by Grahamm - 06-11-22, 01:07 AM
Re: In deep now - by agricola - 09-11-22, 11:45 PM
Re: In deep now - by agricola - 11-11-22, 04:47 PM
Re: In deep now - by Grahamm - 11-11-22, 10:24 PM
Re: In deep now - by agricola - 12-11-22, 05:25 PM
Re: In deep now - by Grahamm - 12-11-22, 08:12 PM
Re: In deep now - by agricola - 13-11-22, 09:23 PM
|
