22-09-22, 03:19 PM
(21-09-22, 07:14 AM)midden link Wrote: [quote author=red98 link=topic=27499.msg330231#msg330231 date=1663450199]
cut the loom and removed the connector block and soldered back together again, 30 mile test ride and all is good, 12.6 volts when idling, rising to 13.3 when held at 4000 rpm. little bit down compared to the 600 but better than it was. Out with a few mates tomorrow morning for a 160 ish mile ride out. will let you know how things go...
Do you have any pictures to show what you actually did Paul
[/quote]
Hi Midden...Sorry no.I do still have the connector and when i get time will take a piccie and you can see how bad it is. I just snipped the wire`s either side of the block and soldered a new piece in, two joins in each wire. Not ideal i know. Next job will be to source a replacement connector block, De-solder my tempoary repair and do a propper job.
One, is never going to be enough.....