Possible clutch problem

[darrsi]

Thanks I've got some great info on these pages going to try tighten the lower part of cable and if that doesn't do it I'm going for new lever, cable , clutch gasket, friction plates and try using the old springs. She does go into gear very easily atm so I'm hoping nothing is too badly chewed up anywhere!!

I just changed both the steel & friction plates, new OEM cable and a new clutch pressure plate which was fractured.


Bit of friendly advice, if you end up getting new plates do not over tighten the spring bolts. In fact I would go as far as suggesting replacing them as they are cheap enough to buy.


But start with the adjustments first, there's a good chance that will fix things.