01-08-22, 10:38 AM
Like Gnasher< I have never heard of anyone turning the seals in any fazer. I have seen it in in cars, particularly Vauxhalls.
Something is sticking, and most likely the piston/s is/are returning but pads are not which means next time you apply the brake it will go down to the end.
Corroded Slide pins is a common reason. Pull the caliper and remove the pins and pads and clean them up. Clean the caliper. Check the pistons are clean.
Apply a little red rubber grease to the pistons and light coat of ceramic high temperature grease to the backs of the pads and pins and re assemble
Something is sticking, and most likely the piston/s is/are returning but pads are not which means next time you apply the brake it will go down to the end.
Corroded Slide pins is a common reason. Pull the caliper and remove the pins and pads and clean them up. Clean the caliper. Check the pistons are clean.
Apply a little red rubber grease to the pistons and light coat of ceramic high temperature grease to the backs of the pads and pins and re assemble