21-01-22, 04:42 PM
If you bore the shock's top mount out to 12mm, you just need a washer either side of the shock to take up the slack.
Alternatively, you could fit top-hat spacers like the ones shown here: https://foc-u.co.uk/index.php?topic=8167.25 (Post numbers 41 & 45 from 'D. Curzon'). These were however the spacer dimensions for fitting the shock to a Fazer 600. For the Fazer 1000, the wider part of the spacers should only be 3mm depth instead of 5mm. Currently running a pair of these on my own bike with R6 shock fitted.
Alternatively, you could fit top-hat spacers like the ones shown here: https://foc-u.co.uk/index.php?topic=8167.25 (Post numbers 41 & 45 from 'D. Curzon'). These were however the spacer dimensions for fitting the shock to a Fazer 600. For the Fazer 1000, the wider part of the spacers should only be 3mm depth instead of 5mm. Currently running a pair of these on my own bike with R6 shock fitted.