19-09-21, 11:37 PM
Thanks for the replies and advice people. Good timing as I had a couple of hours today to do a few tests on the bike!
So all 4 cylinders are sparking so no problem there. I've run the carbs dry so will see internals when I start the strip down next weekend.
The clutch looks new, however the push rod and ball bearing were practically welded together and its no longer ball shape so have no idea whats happened there! Needless to say ill replace.
I've drained the oil too, this looked fine! No milkshake. I've still to drain the coolant so fingers crossed! I really don't want to do another head gasket on an engine again...
Sent from my SM-A415F using Tapatalk
So all 4 cylinders are sparking so no problem there. I've run the carbs dry so will see internals when I start the strip down next weekend.
The clutch looks new, however the push rod and ball bearing were practically welded together and its no longer ball shape so have no idea whats happened there! Needless to say ill replace.
I've drained the oil too, this looked fine! No milkshake. I've still to drain the coolant so fingers crossed! I really don't want to do another head gasket on an engine again...
Sent from my SM-A415F using Tapatalk