(03-09-21, 12:09 PM)Gnasher link Wrote: [quote author=PureBob link=topic=23813.msg326975#msg326975 date=1630665623]
Hey, noob here trying not to start annoying new repeat thread.
Just set about doing some bits: fitting a civi rack and attempting the dual-headlight mod .
I Once I got the tank up I found two metal male pipe collects mating loosely with an oval shaped fanny above the carbs. I panicked a bit cos I was expecting fuel / breather pipes or whatevs.
Any pics or info of what a 2001 tank underside / carbs topside should look like please ?
It's supposed to be like that, just make sure the drain pipe is on the back of the drain coffer, going down passed the back of the crabs and back of the crank case. If you search the board there's plenty of pictures and info about the headlight mod and the drain coffer.
If you do the headlight mod you'll have to realign the high beam lens or you'll be dazzling oncoming traffic and you'll fail an MOT. The high beam (right side) of the boxeye, the reflector is only high beam and will be too high even when the low beam element of the bulb is used.
[/quote]
Hiya fella, if your looking for more light have a search for spotlights on the forum.
Found it fella....try this thread https://foc-u.co.uk/index.php/topic,21527.0.html
Those are my principles...if you don't like them I have others.