11-08-21, 06:00 PM
(11-08-21, 04:16 PM)unfazed link Wrote: [quote author=Gnasher link=topic=27073.msg326776#msg326776 date=1628679765]Unfortunately it is not that simple due to the changes made in the fox eye wiring.
Either: extract the wires from both blocks old and new switch, put the new wire/switch into the old (your bikes) connector block on the switch side, matching up the wire combination to the block on the bike, less the extra wire.
If he fails to get a switch and I get time I will look at how much modification would be required to get the 6 wire switch to work on the fox eye.
[/quote]
I'm fairly certain that's what I did last time I fitted one, but as said it was sometime ago. Not long after they were introduced, some scumbag buggered the lock trying to nick it from a customer then realised it was attached to a ground anchor :rolleyes Customer couldn't afford replacement and did want to claim. It did fit and it wasn't that hard to do, as I remember.
I'll have a look in my records see if I can find what I did, possible I run another wire from the switch to replace the missing wire, really can't remember it was almost 20 yrs ago and I only did it once.
His best options are the latter 2 in my previous post
Later