09-07-21, 11:56 AM
You need to cut out a bit of caliper hanger for it to physically fit - I used a Dremel style tool and just ground away, it's pretty easy, don't go in with a sledgehammer attitude...
I have a couple of thin spacers at the bolts to line up properly... this may or may not be 100% required.
Pads have to match the caliper.
Nothing else needs changed.
Think the year is early 2000's... the blue dot one, on a few different bikes as well if you don't fancy the "thou premium"
I have a couple of thin spacers at the bolts to line up properly... this may or may not be 100% required.
Pads have to match the caliper.
Nothing else needs changed.
Think the year is early 2000's... the blue dot one, on a few different bikes as well if you don't fancy the "thou premium"