Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Loose front sprocket nut...
#7
(03-07-21, 12:50 AM)Fazero link Wrote: Today the new 12mm nut arrived. Cleaned the threads, put some Loctite on there for my head and torqued to 70NM. Hope the problem is solved :rolleyes
Looking at your photo it looks like the splines on the output-shaft are still in good condition, so the inner part of the washer should engage properly with it. just don't forget to bend up the tabe on the washer after you have tightened up the nut.


Messages In This Thread
Loose front sprocket nut... - by Fazero - 28-06-21, 01:30 PM
Re: Loose front sprocket nut... - by limax2 - 28-06-21, 08:59 PM
Re: Loose front sprocket nut... - by Fazero - 03-07-21, 12:50 AM
Re: Loose front sprocket nut... - by b1k3rdude - 03-07-21, 08:58 AM
Re: Loose front sprocket nut... - by b1k3rdude - 03-07-21, 09:00 AM
Re: Loose front sprocket nut... - by Gnasher - 03-07-21, 12:08 PM
Re: Loose front sprocket nut... - by b1k3rdude - 03-07-21, 01:32 PM
Re: Loose front sprocket nut... - by Gnasher - 03-07-21, 01:45 PM
Re: Loose front sprocket nut... - by b1k3rdude - 03-07-21, 11:11 PM
Re: Loose front sprocket nut... - by Fazero - 04-07-21, 01:22 AM
Re: Loose front sprocket nut... - by Gnasher - 04-07-21, 10:16 AM
Re: Loose front sprocket nut... - by Gnasher - 05-07-21, 01:21 PM
Re: Loose front sprocket nut... - by Fazero - 06-07-21, 12:44 AM
Re: Loose front sprocket nut... - by StreetFzr - 28-09-21, 11:27 PM
Re: Loose front sprocket nut... - by Paul - 30-09-21, 01:47 PM
Re: Loose front sprocket nut... - by Gnasher - 30-09-21, 03:16 PM
Re: Loose front sprocket nut... - by limax2 - 30-09-21, 08:31 PM
Re: Loose front sprocket nut... - by Paul - 01-10-21, 01:26 PM
Re: Loose front sprocket nut... - by Gnasher - 01-10-21, 04:34 PM
Re: Loose front sprocket nut... - by FazThou - 01-10-21, 07:36 PM
Re: Loose front sprocket nut... - by b1k3rdude - 02-10-21, 08:46 AM
Re: Loose front sprocket nut... - by Gnasher - 02-10-21, 12:41 PM
Re: Loose front sprocket nut... - by b1k3rdude - 05-07-21, 12:17 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)