So finally got around to fitting the FZS mirrors to the FZ1 and they work as intended, only fly in the ointment is the even more prone to fowling on the bar on full lock than they were on the FZS. So I am going to appraoch the company that makes the adapters and see if they might be interested in making a tweaked adapter for FZ1 riders.
I have to grind down the ends of the studs on the FZS mirrors by 5mm as they were a tad too long, and I put some grease under the bottoms of the adapter to prevent dust/grit ingresse between the fairing and the adapter. And also 2 washers under the FZS mirrors as spacers to prevent crushing of the rubber boots against the adapters.
I have to grind down the ends of the studs on the FZS mirrors by 5mm as they were a tad too long, and I put some grease under the bottoms of the adapter to prevent dust/grit ingresse between the fairing and the adapter. And also 2 washers under the FZS mirrors as spacers to prevent crushing of the rubber boots against the adapters.