26-12-20, 09:41 PM
it you turn the tube upside down and, using the broom handle, insert the damper rod into the tube, once it it out the (now) top end, put the spigot on the end. Then put the fork slider on. Pushing down on the slider onto the broom will allow you to tighten up the bottom (now top) bolt.
Now turn the fork the right way up and tap the upper bush etc into place before refitting the spring.
Now turn the fork the right way up and tap the upper bush etc into place before refitting the spring.
Another ex-Fazer rider that is a foccer again