20-11-20, 02:21 PM
If it was my bike I would do a complete overhaul of the front brake system. Braided hoses either 2 or 3 line set up-Hel or equivalent brand as already said. The master cylinder overhaul kit is cheaper from Powerhouse Automotive as are the brake calliper piston and dust seal kits than the Yamaha ones. I would strip the callipersand check condition of Pistons etc. Rebuild using red rubber grease between Pistons & seals. New pads if required and fresh DOT 4 fluid. When you consider what your thou is capable of it's nice to know you can stop if you have to without "drama"!
I take it your discs have enough thickness left and run true?
I take it your discs have enough thickness left and run true?