changing clutch cable

[Gnasher]

I don't know if this suggestion would be suitable for a Gen2 Fazer, but made the job a piece of piss on my Gen 1.
I got 2 lengths of thin cord. Tied one on the clutch end and one on the handlebar end. Pulled the clutch end through the frame and untied the cord. Then pulled the clutch end down through the frame and untied that length of cord. The old cable is now off the bike leaving 2 lengths of cord threaded through the cable run. Retie the cord to the clutch end and pull it through the frame, and repeat with the lever end, so the cable takes the exact route that the original did. If this is no help, sorry for the intrusion....I'll get my coat

:agree


That's the way to do it