20-10-20, 04:30 PM
(20-10-20, 01:42 PM)Dudeofrude link Wrote: But as you can see from the pics and videos, theu are both fine? Both operate correctly, no noises or resistance??
So I'm baffled as it sounds like it should be the bearings
As mentioned earlier these noises can be notoriously difficult to find at times. Have you checked the airbox intake along it's whole length, air filter not torn, throttle body rubbers to head and to the bodies? Failing that, the clutch has a few bearings, oil and water pump drive chain or one of the pumps, or the gear box.
If you pull the clutch in does the noise change, on the main stand and in gear let the clutch out (be careful) increase the revs, is it still there better worse, same?
Later