11-09-20, 07:32 PM
Cheers guys. Looking at the plates I don’t think i have a clutch problem but now having opened the casing and removing it ive opened a can of worms. I will recheck the compression plate, I used the workshop manual as the my haynes manual has been packed away, needless to say it doesn’t say it needs to be put on in a certain way.
Since then I put back in the original clutch plates to see if that changes things again. They went back in as they are suppose to, all bolts tightened to the torque setting but didnt know about the compression plate.
Without rechecking the compression plate im having problems with the clutch cable free play, i have adjusted both the handle bar free play and engine/clutch free play. Ive adjusted it bit by bit but the bike is pulling when the clutch lever is pulled in. Ive loosened the settings to the max on both sides but its still pulling without releasing the handle.
Any one know what the usual settings are? Cheers
Since then I put back in the original clutch plates to see if that changes things again. They went back in as they are suppose to, all bolts tightened to the torque setting but didnt know about the compression plate.
Without rechecking the compression plate im having problems with the clutch cable free play, i have adjusted both the handle bar free play and engine/clutch free play. Ive adjusted it bit by bit but the bike is pulling when the clutch lever is pulled in. Ive loosened the settings to the max on both sides but its still pulling without releasing the handle.
Any one know what the usual settings are? Cheers