29-08-20, 05:43 PM
After another wasted four hours trying to align my forks using string etc and having no luck. I eventually resorted to the old method I used years ago, slackened both yokes off just enough, line up top yoke by measuring to centre, then checking by eye by laying down behind the bike and sighting through to the front tyre. I used some white market to highlight the front and rear edges of front tyre and by tweeking bars in the direction I needed, to align the front wheel. Three goes at it and half an hour later I've got it right. Torqued every thing to spec. Went for a quick run to check and all feels good.Thanks to all for advice.