05-08-20, 12:33 PM
(05-08-20, 12:26 PM)b1k3rdude link Wrote: [quote author=Gnasher link=topic=26394.msg318778#msg318778 date=1596625905]
- You need to put a micrometer on the pin and measure it in several places, as they wear with flat spots and eccentrically.
- Quick way and only as a guide is clean out the bearing with brake cleaner, once all the old grease is out shake the bearing if it rattles it's shot.
- Didn't think to think of that, makes sense. But I would think the straight-edge method would also show this..? if you rotated the collar as you checked..?
- Learn something everyday.
It would, but to a point, measuring is the correct way.
Later