03-07-20, 09:41 PM
(29-06-20, 04:50 PM)kebab19 link Wrote: Spare parts for sale after a decade of Fazer ownership.
Can send more pics if required. Updated as I clear out the garage.
- Set of yokes. Bought as spares, someone has (badly) painted the lower yoke black: there are also drill holes in the lockstops although they are still intact and functional. The risers fitted are from a Virago 250, which have less rise than the standard risers but have about an inch of 'pullback'. Ideal if short in the arms or you prefer lower handlebar setup. £40 inc post
- Aftermarket adjustable full length brake & clutch levers in silver, fitted the levers to the bike but never even used them on the road £15 inc post.
- R1/R6 radial master cylinder with full length & short brake lever (short one is the black & anodised red lever pictured beside it). Also converter for conventional layout two-line front hoses: this will basically bolt straight on if you currently have brake two lines attached to the standard master cylinder. Huge improvement in front-end brake sensation, one-finger stoppies. £100 inc post.
- Standard master cylinder. £15 inc post.
- Sensor at back of engine block. Errr... will have to find out name of it! Bought but never used £8 inc post.
- 4x mini indicators with 8x fairing spacers / cover plates. Fitted just one but actually preferred the standard indicators with clear lenses. Have the Audi-type directional flashing. I believe they require a different indicator relay fitted, so that they flash at the right speed. £20 inc post.
- *SOLD* Beamtech LED headlight bulbs.
- K-Tech linear fork springs 8.5nm. Originally for a Bandit 1200 / XJR1300, but a spring is a spring. Longer than the standard Fazer fork springs so I cut shorter spacers accordingly to restore correct internal dimensions. Suit a lighter rider between 9 - 12 stone. £40 inc post.
- *SOLD* Full Exup valve
- Ignition coil for Cylinders 1 & 4, useful spare. £15 inc post.
- Hagon Shock. Standard length and spring for a 75-100kg weight rider. Less than a year old, bolts straight on £165 inc post.
- S1000RR rear shock. This shock WILL need disassembled & rebuilt by a suspension company as the damping has gone. Comes with a heavier R6 spring fitted and dogbones which restore the back end to around the standard height. Has an R6 lower mounting bolt and a spacer to go in the lower suspension bush. Preload collar a bit chewed up. Top mount will need drilled out or some sort of top-hat spacer arrangement. £40 inc post.
- *SOLD* EBC FA252 HH front brake pads.
- Full set of stainless steel pistons to suit front blue-spot calipers. Avoids corrosion damaging your seals. Normally £125 on ebay. £40 inc post.
- Yam R1 5jj gear shift. Much quicker / smoother gear changes. £20 inc post
- Head bearing adjuster - makes it easier to torque bearings to correct spec. £15 inc post.
Hi,
I'm interested in
- Yam R1 5jj gear shift. Much quicker / smoother gear changes. £20 inc post
- Head bearing adjuster - makes it easier to torque bearings to correct spec. £15 inc post.
- Are they still available.