Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Carb float height
#12
Well my problem is now solved and many thanks for all the help.
I tightened the emulsion tubes with a small spanner and put a new fuel filter in and she pulls really well through the rev range.
This is my 3rd fazer now, as I have tried other bikes, but the fazer is probably one of the best bikes I have owned and I have had quite a few bikes over the years, Ducati's, other Yamaha's, Kawasaki's etc.
The only small thing I would like to sort out is I have to give it a little throttle to start the bike.The air mixture screws are 2 turns out and carbs are balanced at the right readings. Plugs are new, so I am trying to think if there is anything I could do to improve starting the bike on the button without throttle and it maybe a couple or so attempts to start.


Cheers for your help, it is very much appreciated.
Reply


Messages In This Thread
Carb float height - by Rich74 - 26-05-20, 01:24 AM
Re: Carb float height - by Gnasher - 26-05-20, 10:16 AM
Re: Carb float height - by Rich74 - 29-05-20, 08:52 AM
Re: Carb float height - by Gnasher - 29-05-20, 10:06 AM
Re: Carb float height - by Rich74 - 30-05-20, 08:09 AM
Re: Carb float height - by Gnasher - 30-05-20, 09:16 AM
Re: Carb float height - by Rich74 - 11-06-20, 11:09 PM
Re: Carb float height - by Gnasher - 12-06-20, 04:52 AM
Re: Carb float height - by Rich74 - 12-06-20, 07:37 PM
Re: Carb float height - by Gnasher - 12-06-20, 08:42 PM
Re: Carb float height - by Rich74 - 12-06-20, 09:57 PM
Re: Carb float height - by Rich74 - 14-06-20, 10:56 PM
Re: Carb float height - by Gnasher - 15-06-20, 08:35 AM
Re: Carb float height - by Rich74 - 15-06-20, 06:31 PM

Forum Jump:


Users browsing this thread: