29-05-20, 08:52 AM
The bike wasn't getting hot on cylinder 3 and I checked for a good spark, all ok there. Have taken the carbs apart and cleaned and put in new seals.
I checked float heights and they were all over the place. Someone had previously mucked around with them. I have reset them so before they seat to the float valve closing, they position inline with the mating service evenly, in other words parallel.
Cylinder 3 is now hotter than it was but not as hot as the other cylinders.
Has got me thinking what is causing the problem with no 3 cylinder.
I checked float heights and they were all over the place. Someone had previously mucked around with them. I have reset them so before they seat to the float valve closing, they position inline with the mating service evenly, in other words parallel.
Cylinder 3 is now hotter than it was but not as hot as the other cylinders.
Has got me thinking what is causing the problem with no 3 cylinder.