24-05-20, 07:24 PM
Some pics to go with previous post H1 to H4, not the best but will give idea. I actually found the first resin ring which will help with the idea I had. I didn't use enough resin first time so it wasn't large enough. The resin ring was made using the rubber boot from behind the headlight. I wont show photo of that. The relays I mounted behind crossbar behind main wiring. Some have put relays somewhere behind clocks but I found there was enough space here. I also ran new wires to headlights, just seemed easier to me. To attach spring I used small picture hook and part of the H1 fitting that I had to cut off to enlarge the hole for the H4 bulb.Then along with wiring diagram , job done. And most important part , I got LIGHTS :rolleyes :rolleyes .
I was just going to go to scrap yard and find an old headlight with H4 fitting and cut it down to fit headlight. This would be a lot easier.