13-05-20, 08:56 AM
This is the best guide I could find on short notice
https://www.instructables.com/id/FZ8-air...-blocking/
It's for the FZ8 but it's all the same as FZ1 ?
As for decatting the headers, you just have to take the end can and link pipe off then shine a torch into the collector end of the downpipes, if you can see straight through then it's been done, if not you will see the white honeycomb stuff about 4 inches in.
To get it out I just used a drill, hammer and chisel.
Just remember though once you've done the airbox and cat you will need the fueling sorting as it will be running super lean if not
https://www.instructables.com/id/FZ8-air...-blocking/
It's for the FZ8 but it's all the same as FZ1 ?
As for decatting the headers, you just have to take the end can and link pipe off then shine a torch into the collector end of the downpipes, if you can see straight through then it's been done, if not you will see the white honeycomb stuff about 4 inches in.
To get it out I just used a drill, hammer and chisel.
Just remember though once you've done the airbox and cat you will need the fueling sorting as it will be running super lean if not