Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using Harpic 10x (Hydrochloric acid based) to clean downpipes...
#18
(11-04-20, 02:10 PM)ogri48 link Wrote: a gallon of brick cleaner from the builders yard is a cheaper way to get hydrochloric acid. cement is strongly alkaline, so the acid cleans tools/bricks/slabs etc brilliantly. I used some to clean some badly cement grouted quarry tiles years ago, and where i accidently brushed against the old 15mm copper central heating pipes, they instantly looked as bright and shiny as new. I clean my trowel with it from time to time, but you have to straightaway not only wash the metal in water thoroughly, but also dry it and apply/wipe it over with wd40 or summat. if you dont, it actually rusts before your eyes in minutes. bizarre. if you clean a alu level with it you have to be even quicker, as it dissolves the aluminium. id clean the pipes with it occasionally taking the necessary steps afterwards, but i wouldnt make habit of it. Its kind of like ifyou t-cut paintwork...you gotta get good polish on it staight away or it will fade again very quickly because of the ammonia, hence ive only t cutted my van once in the five years ive had it, but i use a good polish (colour magic) every winter and lots of elbow grease to bring the original colour out
I had a brick I needed to clean off some cement and harpic worked a treat. Thanks to your post Orgi48  :thumbup
I don't do rain or threat there of. dry rider only with no shame.
Reply


Messages In This Thread
Re: Using Harpic 10x (Hydrochloric acid based) to clean downpipes... - by fazersharp - 18-04-20, 02:10 PM

Forum Jump:


Users browsing this thread: