what did you do with your fazer today ?

[Dudeofrude]

What benefit do you get blanking off the Lambda sensor ?

My sensor has been disconnected from the ecu end ever since I fitted the power commander. If not then it interferes with the custom map as it still sends the air fuel ratio back to the ecu which in turn overrides the PC.

I fitted a closed loop plug to the ECU end at the same time I fitted the PC but the exhaust end was partially seized and I couldn't get it out so I just left it as didn't seem to matter.
What I then realised when it came to removing the headers was that I couldnt get them more have 20cms away from the bike as the lambda sensor and cable were still attached.
I'd tried various times to remove it with no joy as the only thing I could get to it with was a 22mm open ended spanner which just wouldnt budge it ?

So this time after trying again I decided to just cut the wire, move the downpipes onto my workbench then grind the sensor in half which allowed me to use a deep socket over the top.
Needless to say that worked perfectly so it was just a case of finding a bolt to fit the old hole. Funnily enough I still had a brand new sump plug (with copper washer) from on of my old 125cc bikes that fit perfectly ?