13-04-20, 01:58 PM
I have exactly the same problem at the moment. It is the carb heater circuit to help prevent carb icing in winter. If you dont ride in winter (cold damp conditions) then you can bypass the circuit. I have just (10 mins ago) ordered the pipe to bypass it. you will need 6mm internal diameter fuel/water hose to go from the thermostat under the tank to the radiator. Alternatively, you can pul the inlet and outlet pipes off teh carbs and join them with a brass coupler (4 or 6mm) and a couple of jubilee clips.
The alternative it to remove the carbs and replace the hoses under the carbs.
The alternative it to remove the carbs and replace the hoses under the carbs.
Another ex-Fazer rider that is a foccer again