02-04-20, 06:41 PM
Well, got the top yoke off by rotating it through 180° with the tank off. The plug on the end of the harness was a battle to get out of the headlamp, but after laying a few focs into it, it gave up the struggle. Drilling the security bolt heads off, took quite a while, good job I've got a pillar drill. When it finally came away from the top yoke I left the switch soaking for a few hours in paraffin, then after drying it, gave it a good go with graphite grease. Then lo and behold it burst into almost perfect on/off movement.
The top yoke gained a few chips in the process, so I'll prepare that tomorrow for a rattle can respray. Sundays temperatures will be ideal for some spraying.
The top yoke gained a few chips in the process, so I'll prepare that tomorrow for a rattle can respray. Sundays temperatures will be ideal for some spraying.
Whizz kid sitting pretty on his two wheeled stallion.