11-12-19, 11:13 AM
What brand / model indicator are you trying to fit?
I recently fitted a GiPro X-Type G2 to my Fazer. Tapped in as follows (if this helps)...
As the wires for your gear indicator will likely be different, I wont reference those. However on the bike...
- Ignition 12v switched live for power (Light brown). Plus might also include Black wire for chassis/ground.
- Speed sensor tapped into 3-pole white coupler in electrical box (under tank).
- Crankshaft sensor signal (yellow wire) behind Left side panel (the one with the seat lock barrel).
Speed signal can also be taken from front wheel sensor. Follow the lead back to where it plugs into Bikes wiring loom. Disconnect it. Rotate the front wheel with ignition on. If the speedo remains at 0, you've located the right lead.
I recently fitted a GiPro X-Type G2 to my Fazer. Tapped in as follows (if this helps)...
As the wires for your gear indicator will likely be different, I wont reference those. However on the bike...
- Ignition 12v switched live for power (Light brown). Plus might also include Black wire for chassis/ground.
- Speed sensor tapped into 3-pole white coupler in electrical box (under tank).
- Crankshaft sensor signal (yellow wire) behind Left side panel (the one with the seat lock barrel).
Speed signal can also be taken from front wheel sensor. Follow the lead back to where it plugs into Bikes wiring loom. Disconnect it. Rotate the front wheel with ignition on. If the speedo remains at 0, you've located the right lead.