Re-fitting rear Fuel Tank bracket - parts order

[F4celess]

I'm attempting to re-fit the (Rear) fuel tank mounting Bracket, which is in a number of parts.
(I know - I should have paid more attention when pulling this apart).

While screwed back together tightly, this has left the bracket quite loose, which isn't correct.

Below is the order I'm fitting these parts, plus an accompanying scribble.
Please can someone put me right here!?

Top
- Tank bracket on top.
- Thick rubber pad sits on top of frame.
- 2 cylindrical screw spacers positioned into screw holes in above thick rubber pad.
=FRAME=
- Air filter box rubber cover (rear part) sits under frame.
- Thin screw bracket underneath, that the 2 bolts screw into.
Bottom

[smg id=3368]

Thanks!