04-11-19, 10:38 PM
It's on the 98 wiring diagram. You can see it if you follow the ground side of the oil level bulb. The bulb has two paths to ground, one path goes from the bulb to cut off relay to oil level switch to ground so the bulb gets ground when the oil level switch is closed, when the the oil level drops. The other path is from the bulb to cut off relay to alarm connector to start button to ground so the bulb gets ground when the start button is pressed.
The wiring diagram shows a direct connection between the cut off relay and the start button. That is a mistake. There is no direction connection, that was pointed out by unfazed here http://foc-u.co.uk/index.php?topic=25456...#msg300493
The wiring diagram shows a direct connection between the cut off relay and the start button. That is a mistake. There is no direction connection, that was pointed out by unfazed here http://foc-u.co.uk/index.php?topic=25456...#msg300493