12-10-19, 07:47 PM
It should not feel harsh at all, something's wrong here.
What thickess of fork oil was added to the forks after the emulators were fitted?When you had the linear springs fitted, were they the longer than the original forks springs and were the internal fork metal spacers cut down to make up for the difference in length?
Your fork caps have preload adjusters? If so, back them off to minimum and see if the ride is less harsh as a result. This could indicate the fork springs are compressed too tight inside the forks.
Also the preload on the emulator can easily be set too high, it's usually 2 - 2.5 turns out from just barely contacting. 2.75 or 3 turns of preload feel too harsh.
What thickess of fork oil was added to the forks after the emulators were fitted?When you had the linear springs fitted, were they the longer than the original forks springs and were the internal fork metal spacers cut down to make up for the difference in length?
Your fork caps have preload adjusters? If so, back them off to minimum and see if the ride is less harsh as a result. This could indicate the fork springs are compressed too tight inside the forks.
Also the preload on the emulator can easily be set too high, it's usually 2 - 2.5 turns out from just barely contacting. 2.75 or 3 turns of preload feel too harsh.