08-10-19, 04:09 PM
(08-10-19, 03:42 PM)crankcase link Wrote: Fantastic stuff! Not only a great idea, but real patience and perseverance to see it through. Bravo!
A few questions have popped up in my head over the last few days as I mulled over the idea of ordering one
- Is there (or do you plan to add) a drag mode? One that'll count down and then time you from 0 to 60 or 100?
- Can the the speedohealer be adjusted independently of the sprocket size? For instance based on GPS comparison, I might want to adjust the speedo down by 1.5% to show the true speed. Is this possible?
- Is there a way to bring the odometer up to the reading on my stock clocks, so it picks up from there? Or do I necessarily have to start from zero?
Thanks!
Many thanks! A drag mode is a great idea! Yes I'll add that in a future software update. If you ordered one now, just keep an eye on the website for the update which includes drag mode and then you simply update the software & firmware on the device which would include the new feature.
The speedohealer is completely independent of the sprocket size. The sprocket size setting is used purely for the gear indicator. So you can adjust your speedo down for a true speed reading. However currently setting the speedo healer at 0 will give a very true speed without any adjustment however each bike might be slightly different.
As for the Odometer, yes - when you plug in and turn on the TFT Dash for the first time it will ask you for your current Odometer reading (I've advised on the website that you take a note of your old Odo before unplugging). Once you've set your Odo it will be saved and maintained from that point onwards.
Hope that helps!