09-07-19, 08:32 PM
Did not get time to come back on this as I was doing the 48000 mile service on my sons Fazer.
Since the earth on the relay did not work and reading through what you seem to have done quickest and easiest way to check the section on the ignition switch is in the box under the tank.
As Dude says locate the connectors to the ignition, but without disconnecting anything the take the 6 way connector with the five wires and loop the blue/red and the blue with a piece of stiff wire (not too thick) in the back of the back of the connector. Turn on the ignition, turn on the lights. If this section of the ignition is faulty this will bring on the lights, if not the fault is elsewhere
Since the earth on the relay did not work and reading through what you seem to have done quickest and easiest way to check the section on the ignition switch is in the box under the tank.
As Dude says locate the connectors to the ignition, but without disconnecting anything the take the 6 way connector with the five wires and loop the blue/red and the blue with a piece of stiff wire (not too thick) in the back of the back of the connector. Turn on the ignition, turn on the lights. If this section of the ignition is faulty this will bring on the lights, if not the fault is elsewhere