27-06-19, 11:53 AM
(This post was last modified: 27-06-19, 11:55 AM by fazersharp.)
(26-06-19, 11:40 PM)mobile mouse link Wrote: the outer plate would not stay on the pins.Got myself mixed up - my tool was an Afram one.
Whereas when I fitted a DID chain the outer plate needed to be pressed onto the pins
Yes on my DID link I had to press it on with the tool it was somthing like the pin was 4mm and the link plate was 4.2mm and there was a guide in the tool to make sure that the plate was not pushed on too tight. A loose outer plate sounds wrong to me - wonder if it was the wrong rived link for the chain ?
When I ordered my C+S kit it was going to come with a an of lube so I got them to swap the lube for an extra link in case I potatoed the first go.
I don't do rain or threat there of. dry rider only with no shame.