13-06-19, 08:46 PM
(13-06-19, 05:47 PM)Falcon 269 link Wrote:
- EXUP cables out the right side,
- also move the coolant overflow hose that runs between the airbox and the frame.
- Finally, there's a zip tie which holds the rubber tank block on the frame crossrail ... make sure the block on the zip tie isn't fouling against the frame. All these things should give you about 1 - 1.5cm clearance,
- Obviously the battery has to come out, too ...
- Final tip to avoid catching and mangling the rear airbox clamps. When you've slackened them off, push them tight against the airbox and then tighten them up.
- I thought I did that last time, but this time I will keep them out of the way with a bungee.
- Knew about that one.
- last time I had that facing upward away from the box - what is that bloody thing for anyway, vibration cushion for the airbox or the tank..?
- Yep did that also.
- doh!, dont know why I didnt think of that last time - mangling them is beyond annoying...