13-06-19, 05:47 PM
EXUP cables out the right side, also move the coolant overflow hose that runs between the airbox and the frame. Finally, there's a zip tie which holds the rubber tank block on the frame crossrail ... make sure the block on the zip tie isn't fouling against the frame. All these things should give you about 1 - 1.5cm clearance, which is enough. Obviously the battery has to come out, too ... 
Final tip to avoid catching and mangling the rear airbox clamps. When you've slackened them off, push them tight against the airbox and then tighten them up. Keeps them off the front of the rubber stub and prevents them getting dragged and bent.
Final tip to avoid catching and mangling the rear airbox clamps. When you've slackened them off, push them tight against the airbox and then tighten them up. Keeps them off the front of the rubber stub and prevents them getting dragged and bent.