08-06-19, 11:04 PM
A starnge one as the Ignitor (ECU) requires that earth to operate which means it has to be getting an earth from somewhere.
It sounds like a short circuit to earth in the loom. There has been reports of the loom fraying under the seat on the route to the Ignitor under the tail fairing
The earth from the sidestand switch after leaving the sidestand switch goes through the Ignition switch, the one of the looped plugs under the seat and then to the Ignitor.
Lift the seat and locate the two looped plugs the earth from the sidestand switch goes through one of those loops.
Ensure the ignition is off and sidestand up, put you meter to the continuty (OHM) scale. Disconnet the connectors (one at the time) and check for and earth on the plugs, if you find an earth on one, put the sidestand down and see if it disappears. This means the earth from the switch is getting this far.
Let me know the result
It sounds like a short circuit to earth in the loom. There has been reports of the loom fraying under the seat on the route to the Ignitor under the tail fairing
The earth from the sidestand switch after leaving the sidestand switch goes through the Ignition switch, the one of the looped plugs under the seat and then to the Ignitor.
Lift the seat and locate the two looped plugs the earth from the sidestand switch goes through one of those loops.
Ensure the ignition is off and sidestand up, put you meter to the continuty (OHM) scale. Disconnet the connectors (one at the time) and check for and earth on the plugs, if you find an earth on one, put the sidestand down and see if it disappears. This means the earth from the switch is getting this far.
Let me know the result