26-05-19, 09:29 AM
Replaced both of mine last weekend because my push cable was a bit frayed. I pulled the carbs halfway out - until the throttle cable cam on the carbs is just outside the frame. It allows easier access, particularly to the pull cable which is a bitch to get in. The push cable is fairly easy.
I did the carb side first, pushed the carbs back in, then did the twistgrip side, and finally the adjustment.
Cables from ebay – just over £30 for both. Gave them both plenty of lube first. Use one of those little cable lube gadget thingy’s. I’ve had one for years - they work well !
I did the carb side first, pushed the carbs back in, then did the twistgrip side, and finally the adjustment.
Cables from ebay – just over £30 for both. Gave them both plenty of lube first. Use one of those little cable lube gadget thingy’s. I’ve had one for years - they work well !