08-05-19, 07:33 AM
Yes you can remove the coolant pipes with the rocker cover on. Try to loosen any crud/corrosion build up first then a blast of compressed air before you remove them, held in with a Allen bolt, you should really replace the “o” rings on re-assembly. I just rubbed the pipes down and painted then Matt black.
I used a normal set of feeler blades to check valve clearances, needed nothing special. All my clearances where in spec, no adjustments needed. Done at around 27000 miles I think.
I used a normal set of feeler blades to check valve clearances, needed nothing special. All my clearances where in spec, no adjustments needed. Done at around 27000 miles I think.