New front tyre fitted and now a singing bearing noise present

[darrsi]

[quote author=bandit link=topic=25213.msg297192#msg297192 date=1556551247]
Have you checked the tyre pressure is correct.

  Thanks Bandit and everyone else for your thoughts, ive had a totally strip down this afternoon as I suspected error when the wheel was fitted, bearings out and new ones on order, the bearing next too the outer spacer feels very rough, therefore I think the fitter has over tightened the axle spindle at some point causing the defect, it could well be the case that this bearing was on it's way out, and the over tightening has finished it off, you can only really hear it when it's under load, the tightness of the axle bolt was defo well over 67NM, I will let you know if the new bearings have done the trick, they are in the post now, if it is, beware of tyre fitting firms who are not just 100% motorcycle, live and learn I suppose.
[/quote]


I had that once, went to what was actually a family run bike shop a few miles from me to check an issue with my front braking and when I next tried to take the wheel off it was like a 20 stone man had jumped up and down on an extended scaffold bar to tighten up the wheel nut, i wasn't impressed  and never went back again. Plus they never figured out the problem either.