29-04-19, 04:42 PM
(This post was last modified: 29-04-19, 04:45 PM by fazersharp.)
(29-04-19, 04:33 PM)bandit link Wrote: If you can wait get individual sockets & breaker bar like silverline off Ebay, make sure you get the right size drive for the 32mm front sprocket nut as direct to the breaker without adaptor is better. Are you still going to remove the swing arm then?.Yes I will make sure its a 1/2 inch socket direct to the breaker. I will have a look at ebay but sometimes the extra cost of heavy item post makes it the same as getting from my local screfix.
I have just spoken to Bike Tourque Racing and they tell me that all of their chains - at least D.I.D anyway are supplied open ended with the relevant joining link so looks like I can do it all without taking off the swing arm but I cant help thinking I should anyway to re grease it after 21 years - 22k dry mileage
Also they can no longer get the Ognibene chain joining tool but instead it will be a Afram one
I don't do rain or threat there of. dry rider only with no shame.