|
EXUP Servo
|
13-04-19, 04:43 PM
So if you manually set the valve clockwise until the notch is about the 2 o'clock position, the servo makes no attempt to drive the exup to its "home" position. It will only home once, unless the bike is started or the valve is manually moved as I mentioned earlier.
Whizz kid sitting pretty on his two wheeled stallion.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
EXUP Servo - by Old-Git - 07-04-19, 04:07 PM
Re: EXUP Servo - by unfazed - 07-04-19, 09:37 PM
Re: EXUP Servo - by Old-Git - 08-04-19, 12:46 PM
Re: EXUP Servo - by midden - 08-04-19, 03:08 PM
Re: EXUP Servo - by Old-Git - 08-04-19, 07:07 PM
Re: EXUP Servo - by midden - 09-04-19, 11:58 PM
Re: EXUP Servo - by ogri48 - 10-04-19, 11:03 AM
Re: EXUP Servo - by Old-Git - 13-04-19, 11:34 AM
Re: EXUP Servo - by midden - 13-04-19, 01:48 PM
Re: EXUP Servo - by red98 - 13-04-19, 02:00 PM
Re: EXUP Servo - by midden - 13-04-19, 02:11 PM
Re: EXUP Servo - by Old-Git - 13-04-19, 04:07 PM
Re: EXUP Servo - by midden - 13-04-19, 04:24 PM
Re: EXUP Servo - by robbo - 13-04-19, 04:43 PM
Re: EXUP Servo - by unfazed - 13-04-19, 04:50 PM
Re: EXUP Servo - by midden - 13-04-19, 09:55 PM
Re: EXUP Servo - by robbo - 13-04-19, 11:43 PM
Re: EXUP Servo - by Old-Git - 18-04-19, 08:57 AM
|
