EXUP Servo

[Old-Git]

Forgive my confusion Mr Old Git
You've bought another servo?  I didn't take your original comment 'Hmm what's this Exup thingy' as being it's faulty or  you've got a fault code?  Have you located the exup valve itself (in the exhaust) and checked it's operation from down below?  I use a mirror on the ground so I can see the pulley from above as I first turn the ignition on to check it's movement and whether adjustment is required.

Hiya, I could hear some fizzing but very little movement of the servo when I switched the engine on. And no flap movement. So I loosened the cables, detached them from the servo, and checked the cables and exhaust flap, both are free / loose. So I removed the servo, and tested it on a spare battery, and to me it moves very slowly - but I've got nothing to compare it against. So a good spare was cheap enough, will be interesting to compare the two. Hope this explains.