07-04-19, 09:37 PM
Yes it will move slowly as there is some substantial gear reduction internally.
I had an issues with the 7000 code on the tacho some years ago.
Dismantled the valve replaced the bushes (expensive feckers) and a frayed cable all back together and was still getting the 7000 code.
I removed and dismantled the servo, could not find anything wrong inside motor worked the pulley moved as it should slowly, put light grease on it and reassembled it.
Back on the bike still getting the 7000 code. Finally replaced it with a good second hand one and no more 7000 code.
There was nothing physically wrong that I could see and the only thing I could put it down to was an issue with the controller board within the servo.
I had an issues with the 7000 code on the tacho some years ago.
Dismantled the valve replaced the bushes (expensive feckers) and a frayed cable all back together and was still getting the 7000 code.
I removed and dismantled the servo, could not find anything wrong inside motor worked the pulley moved as it should slowly, put light grease on it and reassembled it.
Back on the bike still getting the 7000 code. Finally replaced it with a good second hand one and no more 7000 code.
There was nothing physically wrong that I could see and the only thing I could put it down to was an issue with the controller board within the servo.